Use a 15/16” socket or wrench to loosen the blade nuts. A block of wood or the Arnold Blade Removal Tool (49) can be used to stop the blades from rotating. Step 8: Carefully flip the deck over to access the blades With the pins removed the deck can be slid out from under the mower. Step 7: Remove 3 cotter pins and deck pins that secure the deck. Using both a 9/16” socket and wrench loosen, but do not remove, the idler pulley bolts. Step 6: Remove the belt from the idler pulleys and PTO clutch. Using a 9/16” socket or wrench pull the idler pulley arm back to release the belt tension. Step 5: Remove the belt from the spindle pulleys. Using a 1/2” socket or the panel access tool included with Ultima models, remove the bolt from the panel. Use a 3/8” socket or wrench to remove the belt covers from the deck. Step 2: Set your mower’s deck height to the lowest setting. This helps ensure the machine doesn't start accidentally and cause you or those around you harm. Remove the ignition key, disconnect the spark plug ignition wire, and engage the parking brake. Turn the mower off and make sure the engine is cool. Place your mower on a flat, level surface. Step 1: Prepare your Ultima zero-turn mower for maintenance. Always be sure to check your operator's manual for detailed instructions. Depending on your model, the instructions in this video may vary slightly. This video will show you how replace the blades on your Cub Cadet Ultima zero-turn mower. Check the blades at least twice a year, at the beginning and middle of the mowing season, or more often if you mow year-round. How often you visually check the blades depends on how regularly the mower is used. This gradual damage can reduce the effectiveness of your mower, so be sure to sharpen or replace the blades if you notice these signs of wear. Over time, the blades on your zero-turn riding lawn mower can become worn out, bent or dinged.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |